Boats and Marine Equipment for Sale and Wanted
Check out the featured listings
As the leading market provider of teak and hardwood sealers, Semco offers a long-lasting solution for protecting your wood while maintaining a natural appearance. Their sealer is designed to endure throughout the season and can be easily maintained or renewed without the need for laborious deep cleaning or stripping.
Semco Sealer is a solvent-based product that includes colouring pigments, UV inhibitors, and moisture protection.
Ultra Anchor outstanding design demonstrates, why a correct weight distribution is so important when setting and recovering anchor. In fact, invert any ULTRA Anchor and it will instantly recover itself to the attack position. Focused on practical use, and behaviour during anchor´s operation, followed by performance which has been achieved with the innovative patented features, as every Ultra Anchor displays.
Including a curved lead filled tip for instant penetration, a hollow shank for weight distribution optimum and surface concaved base for maximum holding power, and finally large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base. The ULTRA Anchor is suitable for all vessel types and locates securely onto the bow roller. Standard anchor sizes range from 5kg to 200kg with larger anchors available upon request up to 360 kg.
The most advanced anchor swivel - suitable for up to 8mm anchor chain or 21KG anchors!
Well known swivel, a small part in complete anchoring system, but big factor in success of the whole anchor roll up process. Unique design assures your boat no damage, safe anchor operation and easy recovering on the bow roller. No matter the brand or type of anchor you use, you may absolutely trust the Ultra Flip Swivel design, delivering you smooth operation instantly with expected results.
As every Ultra Marine´s Product – it was designed with passion, experience and utmost care to every detail, with highest demands on materials used. The Ultra Flip Swivel is a great start and relatively small investment - with such effect on something you have had spent much more.
Raytheon L760 Colour Chart Plotter. Does not include chart card
Pack of 8x 10mm red anchor chain markers - recommended every 5m of chain
40m of 10mm Calibrated Stainless Steel Anchor Chain
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
Designed in-house and manufactured to order from 316 grade stainless steel, these mooring rope holders prove invaluable for easily reaching ropes and securing vessels against wind and tide. Available in variable heights to suit your specific needs.
Get in touch for mooring rope and accessory advice in order to ensure a fun and hassle free boating experience!
Suitable for other brands of RIB - £990 worth ex VAT and shipping, in stunning white and blue - open to offers
140cm x 45cm - ideal for a stern mooring or similar
50m of 10mm Calibrated Stainless Steel Anchor Chain
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
Lewmar's new DTX anchor fills the gap between the existing galvanised and stainless Delta® anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.
Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of Delta® anchors have come to expect. Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard.
- Manufactured from 316 stainless steel
- Self launching
- Ordinary Holding Power certified
- Guaranteed for 3 years against breakage
1x Rope Snatch Absorber
They provide safe and gentle mooring and can be easily added to a mooring line in situ without needing a free end to thread onto.
- Fits ropes up to 20mm - Made of weatherproof rubber - To quieten a noisy mooring line use 1 - For sheltered moorings use 2-3 - For exposed moorings use 4+
Pair of Rope Snatch Absorbers
They provide safe and gentle mooring and can be easily added to a mooring line in situ without needing a free end to thread onto.
- Fits ropes up to 20mm - Made of weatherproof rubber - To quieten a noisy mooring line use 1 - For sheltered moorings use 2-3 - For exposed moorings use 4+
32m of 8mm Calibrated Stainless Steel Anchor Chain
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
Building on the legendary robustness and quality of the Delta® anchor, the Epsilon anchor offers unparalleled holding power and rapid setting. Its concave fluke and ballast keel ensure market-leading performance, while maintaining self-launching capabilities with Lewmar bow rollers. The Epsilon is crafted from time-proven 316 stainless steel for maximum strength.
- Lloyd's registered Super-High Holding Power: Provides exceptional stability and security, ensuring your vessel stays anchored even in challenging conditions
- Constructed from 316 stainless steel: For maximum strength and corrosion-resistance
- Anti-snagging design: Reduces the risk of snagging on underwater obstacles, enhancing safety and reliability
- Concave fluke and ballasted tip for fast setting: Ensures quick and reliable anchor setting and market-leading holding power
- Proven shank geometry: Supports easy launching
- Lifetime guarantee against breakage: For peace …
Perfect replacement for white plastic versions which manufacturers nearly always use.
Manufactured from 316 grade stainless steel, these mushroom studs add a touch of class to any boat.
maxiChafe Acrylic Weave is a UV resistant soft protection that protects gel coats as well as topsides from damage. Ergonomically designed to install without ties for a fast secure application.
Available in a wide range of colours, including blue, black and grey - choose the best shade from the colour palette to best suit your vessel!
This is the initial step in achieving a flawless finish in conjunction with Semco' sealer. Semco's Two-Part Cleaner is the most effective and straightforward method for cleaning and preparing teak and hardwood for sealer application. It thoroughly cleans teak without the need for harsh scrubbing or sanding, effectively removing greying, food stains, fish, fuel stains, and teak oils. Unlike some single acid-based cleaners that can damage teak or hardwood, Semco's cleaner is primarily alkaline-based and pH balanced to ensure compatibility with our sealer, resulting in a perfect finish every time.
Part 1 dissolves dirt and old sealers, while Part 2 brightens teak and neutralises Part 1. There is no other product on the market that guarantees such seamless compatibility with Semco's top-rated sealer range.
For smaller yachts, the LFF anchor is ideally used as a secondary anchor as it provides great holding power, easy stowage and can be used in a number of mooring applications.
The Lewmar LFF anchor is a simple design which folds flat. It is mainly used as a secondary or stern anchor, manufactured from galvanised materials.
- Folds flat for easy stowage - Proven performance - Mainly used as a secondary anchor - Ordinary Holding Power
The most advanced anchor swivel - suitable for up to 10mm anchor chain or 35KG anchors!
Well known swivel, a small part in complete anchoring system, but big factor in success of the whole anchor roll up process. Unique design assures your boat no damage, safe anchor operation and easy recovering on the bow roller. No matter the brand or type of anchor you use, you may absolutely trust the Ultra Flip Swivel design, delivering you smooth operation instantly with expected results.
As every Ultra Marine´s Product – it was designed with passion, experience and utmost care to every detail, with highest demands on materials used. The Ultra Flip Swivel is a great start and relatively small investment - with such effect on something you have had spent much more.
Nearly new Plastimo long reach dock fender including all pontoon fixings - suitable for most pontoons, particularly QEII A, D, E and Albert larger berths
maxiChafe Acrylic Weave is a UV resistant soft protection that protects gel coats as well as topsides from damage. Ergonomically designed to install without ties for a fast secure application.
Available in a wide range of colours, including blue, black and grey - choose the best shade from the colour palette to best suit your vessel!
As the leading market provider of teak and hardwood sealers, Semco offers a long-lasting solution for protecting your wood while maintaining a natural appearance. Their sealer is designed to endure throughout the season and can be easily maintained or renewed without the need for laborious deep cleaning or stripping.
Semco Sealer is a solvent-based product that includes colouring pigments, UV inhibitors, and moisture protection.
Fender holders for boats when attached to the guard rails make a practical storage solution for keeping fenders organized and secure when not in use. Fender holders are particularly useful for quick deployment of fenders when docking and practical storage when leaving the dock. Total of six holders.
Ultra Anchor outstanding design demonstrates, why a correct weight distribution is so important when setting and recovering anchor. In fact, invert any ULTRA Anchor and it will instantly recover itself to the attack position. Focused on practical use, and behaviour during anchor´s operation, followed by performance which has been achieved with the innovative patented features, as every Ultra Anchor displays.
Including a curved lead filled tip for instant penetration, a hollow shank for weight distribution optimum and surface concaved base for maximum holding power, and finally large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base. The ULTRA Anchor is suitable for all vessel types and locates securely onto the bow roller. Standard anchor sizes range from 5kg to 200kg with larger anchors available upon request up to 360 kg.
Its unique shank profile and ballasted tip make the Delta® anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta® anchor will set immediately. Consistent and reliable in performance, the Delta® anchor has Lloyd's Register General Approval of an Anchor Design as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organisations.
- Constructed of high-grade manganese steel or duplex stainless steel: For unparalleled strength High-tensile shank: Ensures reliability and performance that stand out in any marine environment
- Lead ballasted tip: Provides low center of gravity and selfrighting geometry to ensure rapid setting
- Proven shank geometry: Supports easy launching
- Lifetime guarantee against breakage: For peace of mind (damage by deformation or bending not covered)
£12.60 per meter and available in blue, black and white colours. 3 Strand Polyester is soft, strong and pliable for splicing - making it ideal for mooring ropes, fender lines and anchoring. These Polyester ropes are now heat set to give better balance and lower stretch.
Minimum breaking strain: 8,400KG
Replaceable Hydro Slave Wear Liners for the 10" slave hauler. Two liners per set at £20 per set. New and unused. One set available.
8mm Calibrated Stainless Steel Anchor Chain - £27.50 per meter
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
10mm Calibrated Stainless Steel Anchor Chain - £45 per meter
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
Pack of 10x 8mm red anchor chain markers - recommended every 5m of chain
Perfect replacement for white plastic versions which manufacturers nearly always use.
Manufactured from 316 grade stainless steel, these lacing studs add a touch of class to any boat.
6x nearly new Plastimo long reach dock fenders including all pontoon fixings - suitable for most pontoons, particularly QEII A, D, E and Albert larger berths
£5.60 per meter and available in blue, black and white colours. 3 Strand Polyester is soft, strong and pliable for splicing - making it ideal for mooring ropes, fender lines and anchoring. These Polyester ropes are now heat set to give better balance and lower stretch.
Minimum breaking strain: 3,400KG
maxiChafe Acrylic Weave is a UV resistant soft protection that protects gel coats as well as topsides from damage. Ergonomically designed to install without ties for a fast secure application.
Available in a wide range of colours, including blue, black and grey - choose the best shade from the colour palette to best suit your vessel!
3 new fixed clamp in Seaglaze marine windows. Framed in the series 10 double channel with the blind channel covered. Frame finish is silver anodised. Glazed with 8mm thick, clear tint, toughened safety glass. Size as follows: Height - 915mm OD Width - 815mm OD Frame lip - 15mm each side Cut out - 885mm x 785mm
Price ex-vat per window. 3 available. Shipping not included.
This is the initial step in achieving a flawless finish in conjunction with Semco' sealer. Semco's Two-Part Cleaner is the most effective and straightforward method for cleaning and preparing teak and hardwood for sealer application. It thoroughly cleans teak without the need for harsh scrubbing or sanding, effectively removing greying, food stains, fish, fuel stains, and teak oils. Unlike some single acid-based cleaners that can damage teak or hardwood, Semco's cleaner is primarily alkaline-based and pH balanced to ensure compatibility with our sealer, resulting in a perfect finish every time.
Part 1 dissolves dirt and old sealers, while Part 2 brightens teak and neutralises Part 1. There is no other product on the market that guarantees such seamless compatibility with Semco's top-rated sealer range.
Perfect replacement for white plastic versions which manufacturers nearly always use.
Manufactured from 316 grade stainless steel, these cover strap stays add a touch of class to any boat.
60m of 10mm Calibrated Stainless Steel Anchor Chain
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
maxiChafe Acrylic Weave is a UV resistant soft protection that protects gel coats as well as topsides from damage. Ergonomically designed to install without ties for a fast secure application.
Available in a wide range of colours, including blue, black and grey - choose the best shade from the colour palette to best suit your vessel!
£8.64 per meter and available in blue, black and white colours. 3 Strand Polyester is soft, strong and pliable for splicing - making it ideal for mooring ropes, fender lines and anchoring. These Polyester ropes are now heat set to give better balance and lower stretch.
Minimum breaking strain: 6,400KG
£7.57 per meter and available in blue, black and white colours. 3 Strand Polyester is soft, strong and pliable for splicing - making it ideal for mooring ropes, fender lines and anchoring. These Polyester ropes are now heat set to give better balance and lower stretch.
Minimum breaking strain: 5,000KG
45m of 8mm Calibrated Stainless Steel Anchor Chain
Manufactured from 316L stainless steel material, this chain is manufactured on automatic chain making machines. All chain diameter of 6mm and over is calibrated during manufacture, then proof load tested at the end of the process and embossed at every 20th link or 1m intervals with a four digit batch number for purposes of traceability.
28m of 10mm Galvanised Anchor Chain
Lewmar's new DTX anchor fills the gap between the existing galvanised and stainless Delta® anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.
Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of Delta® anchors have come to expect. Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard.
- Manufactured from 316 stainless steel
- Self launching
- Ordinary Holding Power certified
- Guaranteed for 3 years against breakage
Ultra Anchor outstanding design demonstrates, why a correct weight distribution is so important when setting and recovering anchor. In fact, invert any ULTRA Anchor and it will instantly recover itself to the attack position. Focused on practical use, and behaviour during anchor´s operation, followed by performance which has been achieved with the innovative patented features, as every Ultra Anchor displays.
Including a curved lead filled tip for instant penetration, a hollow shank for weight distribution optimum and surface concaved base for maximum holding power, and finally large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base. The ULTRA Anchor is suitable for all vessel types and locates securely onto the bow roller. Standard anchor sizes range from 5kg to 200kg with larger anchors available upon request up to 360 kg.
Ultra Anchor outstanding design demonstrates, why a correct weight distribution is so important when setting and recovering anchor. In fact, invert any ULTRA Anchor and it will instantly recover itself to the attack position. Focused on practical use, and behaviour during anchor´s operation, followed by performance which has been achieved with the innovative patented features, as every Ultra Anchor displays.
Including a curved lead filled tip for instant penetration, a hollow shank for weight distribution optimum and surface concaved base for maximum holding power, and finally large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base. The ULTRA Anchor is suitable for all vessel types and locates securely onto the bow roller. Standard anchor sizes range from 5kg to 200kg with larger anchors available upon request up to 360 kg.
Shell Rimula R4 15W-40 Oil - 20 litre can - Unopened from New
Check out the latest listings
